INSTRUCT

these documents show the difference between the Instruct E30 gen 1 and gen 2 VSDs

This document provides the steps needed to set up the ES7 (Speedstar) drive for the approved PMM applications

power glitch issue found to affect the instruct controller, shutting down drives unnecessarily.

For the SpeedStar drive having firmware Version v1100 rev08 in the 90700AG control board, the carrier frequency (CF) was forced to default 2.2kHz each time

A thermostat was introduced to the cooling system(s) for all E30s back in 2024 to prolong the life of the fans when cooling was not required. Whenever t

this document provides the steps to reduce the X4 shut down issues with the instruct line of drives.